The amount of rinse aid dispensed is set too low.
Increase the dispensing quantity for rinse aid.
Support for
Dishwashing
White residue on wash items
Clouding has occurred on dishware, glasses, and cutlery after the rinse. The residue can be wiped off.
Only for dishwashers with water softener:
There is no salt in the salt container.
Fill the salt container with dishwasher salt.
Only for dishwashers with water softener:
The salt container cap has not been screwed on securely.
Reinstall the cap, making sure that it screws back on correctly.
Not enough detergent was dispensed.
Use more detergent during manual dispensing or change the detergent you are using.
Use the AutoDos function (depending on the model). AutoDos automatically dispenses the right quantity of detergent. If necessary, increase the dispensing quantity for automatic dispensing under “Settings”.
Too much detergent was dispensed.
Use less detergent during manual dispensing or change the detergent you are using.
Use the AutoDos function (depending on the model). AutoDos automatically dispenses the right quantity of detergent. If necessary, reduce the dispensing quantity for automatic dispensing under “Settings”.
Activate the 2nd interim rinse function (depending on the model).
An unsuitable all-purpose cleaner has been used.
Switch to another product. Use normal dishwasher tabs or powder detergents that are not all-purpose products, and ensure you refill the salt and rinse aid.
For thorough and gentle cleaning of glasses, dishware, and cutlery, Miele recommends using Miele products.
Only for dishwashers with water softener:
The water softener is set to a water hardness that is too low.
Set a higher water hardness in the water softener.
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
